[zavikan]

Does looking at an electrical schematic scare or confuse you?

If not, it's fairly straight forward, even using the dimestore crappy ones. I've installed super cheap ones, and much nicer ones. The difference is how many wires you need to splice into (the more features, the more wires).

That being said, again, the answer to the above question is the pre-requisite.

Also. Be a good boy, and properly splice wires. There are different points of view concerning the 'best' method.

Butt splices are commonly used, but frowned upon by traditionalists who prefer the solder method.

There are right and wrong ways of doing each. NASA supposedly used butt splices for their machinery as they decided the vibrations could cause the stiffened solder points to break wires. A properly soldered wire though is very clean in appearance, and is tried tested and true. Many people don't properly crimp a butt splice, so they become loose.