View Single Post
  #29  
Old 11-11-2005, 08:47 AM
mbtoloczko's Avatar
mbtoloczko mbtoloczko is offline
sans SVX
 
Join Date: Sep 2002
Location: Richland, WA
Posts: 4,250
Send a message via AIM to mbtoloczko
After a few more days of driving with the MAF bypass, I have found that when the engine is not up to full temperature, there is some tendency for the engine to stall, at least with my 5MT. No stalling problems when the engine is stone cold, and no problems when the temperature needle is in the full warm spot, but about halfway between stone cold and full warm, there is some tendency. Putting a slight restriction in the bypass line should fix it.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)

Visit my locker

SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
Reply With Quote