Quote:
Originally Posted by mbtoloczko
Went looking for better tubing and found what looks to be ideal. Its the tubing that is actually meant to be used with the fittings. :-) The tubing is flexible yet kink resistant. All the parts are by Carlson Electric. Its 3/4" dia hose and fittings. I found that if I heated the tubing at around 150F in the oven for a few minutes, its much more flexible and easier to install.
Drove the car this evening, and its running great. The idle was a little loppy when I first started the car but after a bit of driving, it steadied out. Seems that initially, the ECU was running the afr a little lean at idle, and when it would swing way lean, the idle speed would take a dip. Under agressive driving, the afr is right around 13.2:1 from 3000-5000 rpm. I'll post a log tomorrow.
|
Mychailo,
This new version looks terrific. Did you get a chance to do that log?
-Chike
__________________
"Wise men talk because they have something to say; fools, because they have to say something." - Plato
2013 Cosmic Blue 5spd Evo X GSR
2006 Galaxy Gray 6MT RX-8 (sold)
2006 Steel Gray WRX TR (sold)
1996 Brilliant Red SVX L (sold)
|