Quote:
Originally Posted by Suby Fan
did they give you a print out? check the numbers and see how close they are to the middle of the min. and max. numbers if they are leaning toward one side by more then .4 degrees you may have a problem
|
Sure. I got a printout.
Remember, this is a Right hand drive model.
These are the front settings (as recorded by a Beissbarth ML4600 wheel aligner):
Castor: Left: +4.59 Right: + 4.50 (target: +4.50/ +0.45 -0.45)
KPI (kingpin inclination): Left: +16.11 Right: +15.59 (target: +16.00 +- 0.45)
Camber: Left: -O.55 Right: -0.59 (target -0.25/ +0.45 -0.45)
Toe: Left: -1.5mm Right: +0.6mm (target: +0.0mm /+- 1.6mm)
They look in-target to me (but I know squat about alignment)
Ian