|
well the back lash gear cam loose at high rpms and all the metal wet through the motor from the snap ring and washer i put a new gear on but and when they were in there head a timed and i would spin them the woyld stick bad and were not free spinning it messed up the head so i had to get a new head wail i had the other 1 out i had the it professinaly redone then put some new bearings in to it since there was alot of metal though out the motor this is what really ruined the motor this all ran through my motor and this is just the larger stuff that was in there most of the metal turned into small shavings
Last edited by PhillsSvx; 12-10-2005 at 01:28 PM.
|