So no one with a 96 has ever tried to read the CEL code? Could someone with a 96 or 97 at least look at their black connector and see if there's a wire in the correct pin? (under kick panel, top row if held notch up, second pin from left)

Actually, this brings up another question. Do I definitely have the right black connector? There are at least 2 down there. One has 10 or 11 pins, the other 16. I've never actually had an opportunity to read a code, but I tested both connectors on my 94 when I learned of the procedure. When I used the 11 pin connector, I got the expected steady fast blinking light. When I tried the 16, nothing. So it's the 11, right?