[svxistentialist]

Hi Noir

Seems strange it worked before. If the switch kept the motor driving the window down with no let off, it would blow a fuse, check fuse 15, 10Amps. However, this would probably stop all windows.

Most likely the cause is a motor burned out, or there is a regulator for each motor on the frame of the door low down which could be faulty.

However, make sure you have the connectors on tight, and also check the earth on any looms near the window motor.

You will probably have to take off the door panel to check this out. When it is off, check all connections. If nothing is obviously loose, you have a problem for an auto electrician. However, at this point you should be able to manually move the window up in it's groove. You may have to take off the winder mechanism to do this if the motor is dead, and jam up the window in position until you get a motor or regulator.

Sorry I can't be of more help.

Joe