B&M Hi Tek Cooling System
How do you think this B&M Hi Tek cooling system would be for this AT cooler situation? Has fan thermostatically controlled to kick in at 160 degrees. Is 10 1/2 by 6 1/2 inches, plate type, 4 inches thick.
Is there anyplace to mount this that would be good and to avoid behind (or in front of) the AC condensor or the radiator (hot air!)?
YOUR OPINIONS PLEASE - Thanks! 
P.S. $190. @ Summit
__________________
Jim
1995 Laguna Blue SVX AWD L - 240K (daily driver) - "ReBuILT" used engine at 236K miles (6/13)
2013 Veloster Red - Driver Now??Dropsprings [1/2" rear, 1" front] with Koni Strut Inserts> Magnaflow Exhaust System> ECUTune Stage 1av1 Upgrade (from 1v4)> ECUTune TCU MOD> Aluminum Crankshaft Pulley> Stainless Brake Lines> Phenolic Spacers> Perforated Brake Rotors (dint like, OEM now)> SmallCar Shift Kit (resting since TCU MOD)> 7-Position Ground System> High-Pressure Fuel Pressure Regulator (resting)> ATF Cooler & Campaign Filter> Yellow Polish Polyurethane Bushings> Pioneer Double-DIN Stereo with JL AUDIO Speakers> Driveshaft Rebuilt with C-Clip U-Joints> 15 Min MOD> 20 Min MOD .. . (2011)
 Valentine One Radar Detector with Remote Display - ucan'tseeme! 
Last edited by James Scott; 05-31-2003 at 02:47 AM.
|