|
I've got the STi Group N motor and tranny mounts. The Group N mounts are about 1/4" shorter and some slotting and welding is required. My mechanic (Dave Clark Motorsports in Kent) did the motor mounts while the tranny was out of the car. He had his doubts about whether the Group N mounts could installed with the tranny in the car. Not sure how that applies to the stock motor mounts.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|