Re: Duty Sol A?
Quote:
Originally Posted by Trevor
The resistor is enclosed in an oblong small metal enclosure, bolted to the side of the engine compartment, behind the battery. Two wires are attached via a plug/socket connector. You can not miss it.
It should measure between 9 and 15 ohms and is usually 12 ohms. P.S. With the plug disconnected.
|
It should also be noted that you cannot measure the resistance of an enegrized circuit as you will not only have an innacurate reading but you will damage the meter.
__________________
2007 GS 450h-Active Stabilizer/Radar cruise
1994 L Blue 3.70 VTD
ASE Master Automobile
ASE Advanced Level Specialist
Toyota Master Diagnostic Technician (former life)
|