|
I just did my brakes this weekend. When you replace the brake lines make sure you use a good brake line wrench. It looks like a box end wrench with a slot to fit the wrench over the brake line. I could not find mine and ended up using vise grips, which I would not recommend. I ended up finding the wrench when I was putting all my tools away after the job (what a pisser).
The other item of note is the OEM spring clips that hold the brake line in place will not fit on the stainless steel lines from Raceconcepts. I found new clips that worked perfect after visiting three parts stores. They cost 2.50 for a set of 4. I saved the package and will post the information when I get home.
|