Quote:
|
Originally Posted by deruvian
...
So, did I do it correctly? If not, please let me know. I will fix it tomorrow.
|
That's about how I expected that camber bolt system to look. If you loosen the camber nut and the lower strut mounting nut, then as you turn the camber bolt, you should see the angle between the strut and the knuckle changing.
The orientation of the camber bolt washer will affect whether the range is say, from 0 to +1 deg or from 0 to -1 deg. That tab on the washer is what does it.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
Last edited by mbtoloczko; 04-14-2005 at 10:39 AM.
|