|
belt squeal
Are you sure it's not the alternator power steering belt? If you have your A/C off when you start it, and it still squeals, it could be the other belt.
Anyway, the A/C belt is tighened with an idler pulley directly below the compressor. You must loosen the 12mm nut at the center of that pulley, and loosen the 12mm jam nut the adjuster arm pivots on, 2.5 inches above and towards your left. Closer in to the engine is the adjustment 17mm nut, cast into the pivot arm. Turn that nut counter clockwise to tighten the belt, then lock down the pulley nut, lastly lock tight the pivot nut.
|