|
no luck
I belive I've tried it without the fuse in, and there weren't any problems.
About the starting problem. After school I swapped both crank position sensors int the center with the ones from the extra wiring harness we have. I was hoping it would solve the problem, but no luck. It'll hiccup a little, try to start.
I took out all the plugs and all but 2 were soaked. one was completely black, the one that when injector was pulled, it would kill the engine. The other was also an engine killer, and looked in good condition. So now its either ignition, or fuel. I've tried swapping injectors, which didn't help. I've checked if there is spark a while ago, before these problems. I'm going to have to check again.
|