The sunroof is removed and will be the same color
Regarding removal of stuff...
I took off the mirrors and door handles before spraying the primer. I didn't remove seals because I had bad experience removing them on a parts car I had. Also, concerning the bumpers, cladding, and trunk lid...no thanks!
Trunk lid I already have setup at a good angle that will allow me to spray all exposed surfaces with ease. If I remove it, I have no fixture to attach it to, so getting the edges/bottom/etc. will be near impossible. Same with the bumpers.
The cladding I really would've like to have removed, but didn't know how, and didn't want to damage the clip mounts in the process. When I removed the rear 1/4 trim things under the windows from my parts car, it took forever to do the 1st one right, and the 2nd one I ended up breaking a few of the clips and clip mounting slots. Could I do that even though it's already primered? I think I could. Maybe you can let me know how to best go about it.
I already drove myself crazy masking the car to accomodate this approach, so I might as well stick with it now
I'm also fortunate to have a black car as a base...that allows lots of flexibility as black sills and black brackets and such will still look just fine even though the exterior is going to be a slightly different color.