[redlinedeath]

alright, so im toying with ideas for an intake on my sitting on jackstands svx. i was thinking something along the lines of xxtunings eg33 powered impreza, but dont want to deal with the changeing to MAP sensor, and required things, and wouldnt be able to get a strut tower brace in there then, and useing a maf sensor with that style would require waaay tomany sharp bends in the tubing, and to little clearance. so i was thinking of doing the tomyx intake idea(or the actual piece) running to the maf, that ataches to an air box that hasthe flat panel filter sitting on top, that is force fed air via a side mounted scoop or a custom NACA duct, though i dont know if this will produce enough pressure, but am hopefull. anyhow, when the hood closes, it will seal the scoop/duct channel with the top of the air box, with the filter sitting on top, and the maf sensor attached to the back of the box, makeing a relitively not very "bendy" intake with good air flow. any ideas, comments, flames or anything? im heading out for my daily coffee, cigerettes and conversation break right now, ill draw a diagram as to explain whats going on exactly incase anyone is wondering. i know, intakes can be a contraversial subject, but isnt experimentation one of the best parts of owning this car?!?!