View Single Post
  #7  
Old 10-03-2005, 04:31 PM
oab_au oab_au is offline
Registered User
Subaru Gold Contributor
 
Join Date: Mar 2001
Location: Coffs Harb, Australia.
Posts: 5,032
Significant Technical Input Registered SVX
Quote:
Originally Posted by BrettC
I have a '92 Pearl white SVX and am in the inner part of Sydney. I have a noise and shudder in the front with hard turning and particular turning. As expected I have had all answers and no success. CV's beraings etc have been looked at. It began when I had an oil leak from the valve covers and oil got onto the front end on both sides. The latest suggestion is the transfer case and it will get better. It is not bgetting better. Any suggestions
Brett
Gid'ay Brett, welcome to the forum. Eastern Suburbs? I lived at Maroubra beach before I saw the light and moved up here to the North Coast.

Your problem would seem to be the Limited Slip Clutch, in the rear of the transmission housing. This clutch is used to prevent wheelspin from the front or rear wheels. It uses the C solenoid and transfer valve to operate it. The solenoid or valves would appear to have stayed in the applied position, to hold the clutch on, causing the noise and shuddering that you have found, as the drive line tries to unwind.

The fix is to remove the rear transmission housing and replace the "Transfer valve Assemble", this includes the solenoid and valve. As the clutch has been binding, it would be prudent to replace the clutch plates while the housing is off.

As you may know, the AWD system that is in our model is different to the US model, you may want to search the Down Under and European Forums for other posts on this problem. Your Friendly Subaru Dealer can do the job, as any good mechanic could. Cost would be about $400.00.

Harvey.
__________________
One Arm Bloke.
Tell it like it is!

95 Lsi. Bordeaux Pearl, Aust. RHD.149,000Kls Subaru BBS wheels.
97 Liberty GX Auto sedan. 320,000Kls.
04 Liberty 30R Auto Premium. 92.000kls.
Reply With Quote