all points and marks alligned?
so remove the thing you use to let the spring tighter come back in position.
now, u can install freely the crankshaft pulley, and use it to make the engine have somes turns.
for my case, i have done 3 revolutions.
the marks of the belt are unalligned whit the mark of the pulley?
dont panic. just allign the crankshaft and check the allignement of the camshafts.
all is ok!
now u can install all things like the removal but in the other way.
after that, you can add cooling fluid and power steering fluid.
now you can start the engine and check if all is ok.
donc forget to add cooling fluid, power steering fluid and tranny fluid if nessessary.