Re: A little help with engine removal...
It may help to loosen your tranny mount. I suspect the transmission is restricting the engine from lifting enough to clear the bushing studs from the crossmember. You need the studs to clear so you can slide the engine studs (threaded into the bottom holes on the backside of the engine) out of the bellhousing on the trans.
__________________
Cam
'92 Ls-L Dark Teal
11:1 CR ECUTUNE pistons
ECUTUNE .256 duration intake/exhaust cams
ECUTUNE STAGE 2AV1 ECU
Z32 MAF/SR20DET injectors
Balanced & Blueprinted
|