[svx_commuter]

Originally posted by deruvian
.................... there is a small access hole near the rear of the engine block where you can see the flywheel. Sure enough, just below the thottle bodies is a small black cap, under which I can see the ring gear for the flywheel. I jammed a screwdriver in there,........................

Oh please let us know if the flex plate breaks at some time in the future. It would be nice to know if the small thin piece of flex plate metal under the bolt head can handle the tightening and lossening of the crank pulley bolt. This might be another reason why the flexplates fail other than missing alignment pins between the engine and transmission.