|
Hi
Do you have a theft protection system? It can make problem.
According to my circuit diagram there is no relay between the start switch and the starter. The power comes from fuse SBF4 to the ignition switch.
On the way it pass the inhibitor switch at the transmition.
The inhibitor switch can make problem if itis worn or not correct adjusted.
To check that you can by pass it by connect no 11 and 12 at connector B13.
B13 is located at top of the converter housing, it is an twelve pole connector.
The cabels are black/yellow and black/white.
I hope this can help you. Good luck
Regards
Lars
__________________
lars s
|