[Hocrest]

Swapping the door is easy, if you have someone to help hold it.

- Open door
- Hammer out the spring pin that holds the stay in place
- Pull the grommet away from the car and pull the wiring out of the body until you get the connectors, unplug them.
- With someone supporting the weight of the door, use a ratcheting 12mm wrench to remove the 3 bolts holding each hinge to the door. (If the fender is off it is easier to remove the hinges from the body while the door is closed)

Instalation is the reverse.

Are you getting a key with the new door? If not you can probably have a locksmith fix the new door to take the old key.

I don't know that the upper glass can be replaced very easily, I don't recall anyone doing that. You may have to take it to a glass shop.

What side/color? I have both Teals, and a passenger silver that have all the glass intact