Quote:
Originally Posted by Mike621
Make sure none of the bolts are stripped and that the lip of the pan is free of any bends around the bolt holes. Clean the old sealant off with a razor blade if you have to.
Good luck.
|
None of the bolts were stripped as I got proper torque on each of them. I do need to check into the bends though...
I've been using a razor blade, but I can't really get into the grooves with it. I can use it on the flat spots though. I'm hearing that Ethyl lactate might work in disolving the RTV...
Or I could just pay $70 for a new one and call it a day.