[Will]

What I did was to take the kick panel loose below your fuse box underneath your dash. Locate 2 blue wires. Locate 2 black connectors. Grab the smaller of the 2 connectors and hold it notch up. With the ignition off, insert 1 of the blue wires in the top row, 2nd pin from the left. Turn key to on position but do not start car. Count your CE light for blinks. Long blinks=10 short blinks=1. There may be more than one code stored so count several times. I think this is for USDM only though. Not sure if this is what your looking for.