View Single Post
  #1  
Old 03-16-2005, 07:22 PM
benebob's Avatar
benebob benebob is offline
Have a poncho I can borrow?
 
Join Date: May 2001
Location: Lancaster, PA
Posts: 6,561
Anybody have any experience replacing a pan gasket on a Ford?

My pan gasket was leaking so I replaced the gasket and fluid.- still leaked

Replaced the pan and put another new gasket on- still leaks not the same spots though.

Torqued to 8 first 10 now, max is 12 (which I wouldn't go past) I found out by stripping the one bolt and having to tap it larger. It seems to leak away from the bolts but it is tough to tell as it drips most everywhere. Any ideas? Not getting much help on any of the ford boards I've been on.

The entire bottom of the tranny where the gasket goes is spotless clean so that isn't an issue
__________________
British vehicles are my last ditch attempt to keep the nasty Italian thoughts in my mind at bay. So far its working.
Reply With Quote