Quote:
Originally Posted by halistan
**UPDATE**
They did tell me that the gauge on the fuel pressure regulator didn't work. It was set to 40psi but when they tested it, it actually was set to 70psi. They dialed it back down to 40 but I can definitely feel a loss of power, but I really dont' want to burn out my fuel pump so i'll leave it I guess.
|
Do you have a wide band AFR gauge? If not, I highly recommend getting one installed ASAP.
Just make sure you are running with the fuel pressure Mike intended... double check - especially if you feel a loss of power. The fuelling maps are done to match a certain fuel pressure at a given load level. Make absolutely sure you are not running lean or you will destroy the force fed engine in no time.
/T