|
Re: new coilover opportunity (March, 2010)
Quote:
Originally Posted by sicksubie
You might want to post this somewhere it will get more attention than buried in a sub forum of mod mania... If I can get a set that would have in the ballpark of 600lb springs I will be in 100%...
|
Yeah, I thought about posting in the General forum but didn't want to potentially annoy anyone with the appearance of crossposting. I think I'll post a link in that forum to this thread. AMR said that anything from 275 lbs/in to 1250 lbs/in is available. They use HyperCo springs which are among the highest quality. (I researched HyperCo when looking at spring options for my Koni/GC build.)
Quote:
Originally Posted by Dessertrunner
...
Based on the above I thing these look good, I would like to know what brad damper etc also is it like the Koni with a shaft at the top or is it like the DMS with a tube.
Tony
|
Hi Tony,
Good to see you are still in the SVX game and sorry I didn't back to you last summer. Life is pretty busy these days. Anyhow, these are a monotube damper, not inverted, so the shaft is above. The product is designed and built entirely in-house at AMR. Are you considering putting a set in your offroad SVX? If yes, I think you'd need a custom offroad design.
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|