Quote:
Originally Posted by Jayahalasi
ok let me run you guys through whats happened
1. had to replace o-ring as it was mostly melted, took everything apart matched up to the o-ring, put back together and replaced with dexron III ATF per the guide i was using.
now this is either a bad idea to use this fluid or atleast it was a bad idea to mix it with whatever remaining fluid i had, because it really F'ed up my power steering.
2. So I drained ALL the fluid out and replaced it with STP power steering fluid.
3. now my powersteering fluid looks like milky white water (was clear fluid before)
what did i do wrong?
|
Milky white seems to me to imply air in the system. I'm not sure how to bleed the system, but that is my guess