Quote:
Originally Posted by Green1995SVX
Here is a pic showing how I connected the line under the back seat.
|
Hey, here's a fun one. I had to replace the hard lines that run over the tank with rubber ones. So I'm bypassing the hard lines with rubber ones that clamp to the ones in this picture and run all the way up to the connections on the tank.
The evap and return lines are fine. The delivery line, if I understand the diagrams correctly (and they're not actually that hard; I just hadn't seen one labeling the lines that come out of the floor until today), is a 5/16 line in the floor and 1/4 out of the tank. So I'm not sure what size hose I need to use there.
I keep rechecking this, because it just doesn't seem right. But the tank has two 1/4 connections and one 5/16 and the floor lines are the opposite - one 1/4 and two 5/16.
Any advice? I can try to force a 1/4 line on the 5/16 end or try to clamp down a 5/16 hose on a 1/4 line.