[svxistentialist]

Johny

One thing that will be a help to you; the details you have been given above are good, and you will only be tempted to look for the BFH once or twice

However: the metallic edges of this cage are edged like a knife. These knife edges will mark everything they touch. Particularly at risk is the faux wood of the lower console, and the surface of the cigar lighter and ashtray compartment.

My advice is this; get some 2" or 3" packing tape, heavy duty if possible, and mask up these surfaces before you start. This damage tends to happen just as you have got the cage out as far as the connected loom at the back will allow travel.

Speaking from experience.

Joe