View Single Post
  #7  
Old 05-26-2005, 08:37 PM
JIMSVX's Avatar
JIMSVX JIMSVX is offline
.... what a sweet ride !!
 
Join Date: Apr 2005
Location: St. Louis, MO
Posts: 179
Registered SVX
Quote:
Originally Posted by JIMSVX
Ali - Here's several Endwrench articles on retrofitting the '92 SVX (and other Subaru models) from R12 to R134, including Subaru Kit part-numbers and instructions:
http://www.ravensblade-impreza.com/t...nt/acretro.pdf
http://www.ravensblade-impreza.com/t...vent/retro.pdf

This is an Endwrench article that discusses the R134 refrigerant in general:
http://www.ravensblade-impreza.com/t...f/vent/134.pdf

Finally, here's an article on all the Subaru A/C systems that will probably tell you more than you ever wanted to know.
http://www.ravensblade-impreza.com/t...f/vent/ac1.pdf

- Jim
I meant to add that I had the conversion done by our local mechanic (who has done the conversion on other non-Subaru models.) He replaces the dryer and oil but no O-ring change. The cost was $230 and so far it's still putting out nice, cool air (he said with his fingers crossed.)
- Jim
Reply With Quote