[Splinter]

Bleh ok.

Pedal box is in, after much damage to my knuckles and the firewall. Need to do a little more grinding before the master will fit.

Trans is most of the way out, but unlike the imprezas and legacys I'm used to, turns out you can't drop the trans with the cv axles still attached and have them pop out, so now I have to do some wiggle work to get the axles back out.

I'm probably around 6 hours into the swap so far, I figure tomorrow I should get in another 6 hours, hopefully finish dropping the 4eat and get the 6mt shimmied into place.