|
TCU code check, for previous [stored] problems
To perform the TCU self diag test for PREVIOUS problems
1) Warm up engine by driving at speeds greater than 12mph.
2) Stop vehicle and turn ignition switch OFF.
3) Turn ignition switch ON and make sure POWER indicator lamp comes on.
4) Turn ignition switch OFF.
5) Move selector lever to "1" and turn manual switch ON.
6) Turn ignition switch ON.
7) Move selector lever to "2" and turn manual switch OFF.
8) Move selector lever to "3" and turn manual switch ON.
9) Move selector lever to "D" and trun manual switch OFF.
10) Partially depress accelerator pedal (to turn idle switch off).
11) Check code as displayed on POWER light. Blinking once every 1/4sec is normal.
more powerful information
__________________
Black Betty [Bam a Lam!] '93 UK spec, still languishing Betty
Jersey Girl Silver '92 UK [Channel Isles] 40K Jersey Girl @ Mersea
Candy Purple Honda Blackbird Plum Dangerous
White X2 RVR Mitsubishi 1800GDI. Vantastic
40,000 miles Jersey Girl
|