[AUSVX]

Hey I just changed the cam, cam and crank sensors, the car starts and drives so different now

Before:
Cold start - fine
Starting after immediately switching off - fine
Come back 2 or more hours later to start - engine turned over and over and over

My idle was low before, and now it's back up, my idle was at about 400rpm, at or below (in drive) the first line from 0 on the tachometer, the car vibrated because the idle was low, you could feel the fans kicking in and out and any rpm fluctuation SO ANNOYING!!

Now it's good as gold, idles at the 1st line below 1000rpm

I can take a picture of my old sensor if you like

Jordan.