|
Re: 1.5" Exhaust port size
Quote:
Originally posted by svxfiles
Here's the pic I promised. The port is 1-1/2" in diameter. There are more pictures in boxer6's locker. Hope this helps.
BTW, there is also a shot in the locker of the best way to reach the (4) 12mm flywheel to torque converter bolts under the intake manifold after removing the alternator. Tom
|
Hi Tom. Thanks for the pic!
How about intake port dimension?
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|