Quote:
Originally Posted by SURTEESS
Harvey, yes I remember that addition that you sent me - now just got to find which box it is located in (from about 30 boxes - each about 300mm x 300mm x 300mm).
I wanted to ground the A4 pin in order to turn on the "POWER" indicator ....... will this work with the ROM you sent me ?.
Attached is a picture of the NZ (left) with JDM (right)
Harvey, do I place your ROM into the empty space and then remove the IC above it ?.
|
The way Phil set it up, it is off when grounded, on when open, so you can work some thing out with the JDM switch.
Yes it is an easy fit, suck the solder out of the board, solder the socket in, plug the ROM in, No, 1 pin top left as your pict shows, remove or disable the original ROM.
This removes the Economy map replacing them with the full set of POWER shift maps that the JDM cars have, makes it a different car to drive.