Quote:
|
Originally Posted by cdvs
This is a circuit breaker that resets itself when it cools off. It could be your problem. IIRC, it's 20 amp (but maybe not) and is designed to prevent overloading by using too many of the devises at the same time. Should be safe to bridge it for a test, just don't do more than 1 motor at the same time. One of mine had corroded and I replaced it with a generic from Advance Auto. Let me know if you need to know the amps and I'll look it up.
Good luck.
|
THE IIRC was the EXACT PROBLEM.... THANK YOU VERY MUCH!!!!!!!!!!
I feel Like I owe you $$$$$.... I have seen this problem on here many times so hopefully this will help many others in the future.. Thanks again..