05-20-2002, 04:47 PM
|
 |
Thread Killah
|
|
Join Date: Feb 2001
Location: Greenville, SC
Posts: 5,835
|
|
|
I have replaced cracks in the radiator plastic with some gunk called magnum steel and had great success so far. About 6 months and no sign of leaks. I don't know about the whole neck breaking off though. That might be asking too much out of epoxy. Since it is only the overflow and not a huge deal if it breaks again you could definitely give it a try. Make sure to sand down the mating surfaces and use rubbing alcohol to clean it up before using any epoxy.
I also tried JB weld and some marine epoxy and those did not work.
__________________
Matt
Locker Link
2015 BRZ Limited 6MT
92 Ebony LS-L ECUtune Stage2av1, Z32 MAF, 370cc injectors, TomsSVX intake, BontragerWorks 22mm RSB #003, HID Hi and Lo beams, OT endlink and bushing mods, PWR Aluminum radiator, Harvey's QC shift kit, 2.5" flowmaster 80 exhaust, 17" Michelin Pilot Sport A/S, Poly sway bar bushings, Slotted Bradi rotors, AFBeefcake powdercoated calipers, 97 grill, and a huge set of air horns. 300,000 miles and counting
92 Ebony LS-L. ecutune stage1v4, motorsport 1pc pulley. Garage Queen - sold to Dad in upstate NY 155,000 miles
19 Subaru Ascent Premium - -Hers !.
89 DL 4x4 little red wagon - a.k.a. The immortal suby. 275k R.I.P.
|