View Single Post
  #4  
Old 11-12-2012, 10:49 AM
ShaneHobson ShaneHobson is offline
Registered User
 
Join Date: Jul 2012
Location: Waikato, New Zealand
Posts: 364
Re: NZ new SVX at Rotorua dismantler

I've been thinking about your a/c display. I made a start on pulling mine out, but it looks like quite a bit more than just the display module has to be removed first to get to it. When I have some time spare I'll have a crack at pulling it out of my parts car.

I didn't notice if the rest of the washer system was intact. One of the nozzles had been removed. I recall all the dash switchgear was intact. But I don't know where the washer switch is.

It had a switch for heated side mirrors. Interesting because on my JDM which had heated side mirrors they are operated by the rear demister switch.

I suspect the dismantler would set their pricing based on how much time it will take to remove the parts. Getting around the car was difficult and the bonnet is jammed shut. So I suspect parts won't be cheap. They may be open to allowing you to BYO tools and DIY dismantle.

Other option is one of us buys the whole wreck and stores it.
Reply With Quote