Quote:
Originally posted by dekidd7457
I did not see any wear on the gears or shafts. The brake band was burnt along with the reverse drum so I replaced both. The reverse clutches clutches were seized together. The facings on the high clutch were burnt so I replaced them too. All the other clutches looked ok but I got a kit that came with them all so I replaced all fiber and steel plates.
The trans was full of dark brown and black fluid but no filings or big pieces of material.
The car does not move at all in Drive. The engine revs just like its in neutral. When I manually shift the lever to first or second the car moves fine.
Thanks
|
If it won't take off in 1st when the lever is D position, but will when the lever is in 1st position, it is most likely the 1-2 one way clutch is not operating.
Were you driving the car when the box failed?, or did you get it in that condition? If so what was the procession of failure, what went first ?
Harvey.
