Quote:
|
Originally Posted by mohrds
A few points to remember:
Wash out all old grease with a solvent (clean paint thinner or brake cleaner). The reason is that some greases are incompatible and you don't want that inside your joint.
...
As long as the axles are out, price out having them balanced to make sure they aren't causing any extra vibrations.
Doug
|
So I guess an entire halfshaft assembly is balanced all at once? Have you done this with your half-shafts? Any corrective weights added?
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|