[Hocrest]

We did this on the racer and others have done it also.

- Remove the pump
- There are two lines coming from the master, they are equal.
- "T" one line to front/right and rear/left, "T" the other to front/left rear/right
- If you can find a "T" in the proper threads (10 x 1.25?? flare) that will be easiest, we had to use a "T" with SAE threads, cut the flare off of the lines and re-flare the tubing with SAE fittings
- The computer is under the passenger seat on US cars, I'd imagine it's under your drivers seat?? It's under the carpet.
- A hammer will remove the tone rings on each wheel. If you want to remove them intact, you'll need to pull apart the hub.