[msvx95]

Hey go to Subaruparts.com and you can order the following parts:
You need
1) 82182AA30 - Battery holder bracket (1)
2) 82161PA000 - J Hooks (2)
3) 82122PA000 - Battery tray (1)
4) 023706006 - J Hook nuts (2)

Place the battery tray into the frame area it sits on....place battery on top, then set the battery holder bracket on top of the battery....you will picture how the J hooks fit from this... Take the J hooks and hook the "J" part to the car..under the battery tray..(there will be a small hole to hook it to) do this on both sides...so then the J hooks will have the threads upward coming through the holder bracket on each side of the battery. Last run the nuts on each hook....you may have to wiggle the battery to get it set just right between the hooks..... That's it...then rehook up you positive and negative connections and make sure you have a good ground from the negative properly attached to the metal on the frame.... Also make sure your connections are clean and no buildup on them. You could be getting some bad charges because the connections may be corroded...Try a wire brush.

Does that help?