Quote:
Originally posted by Michael Blue
...
OK, new question...What would the best buildup for the 3.3 H6 be, going for reliability, power, and ability to handle boost?
I'm looking to add about 15psi from an Eaton or Lysholm SC, the engine will be mated to a manual and an AWD system with a fixed, rear-biased center diff.
|
Now there's a question and a half. You'll never get 15 psi with the EG33 on stock internals, at least not for long. You'll need to do forged pistons at the minimum. Some work to reinforce the deck might also be necessary.
What do you mean by a "fixed" center diff?
__________________
Mychailo
:: 2006 Silver Mitsubishi Evolution 9, E85, 34 psi peak, 425wtq/505whp DJ ::
1995 Laguna Blue SVX L AWD 5MT (sold)
Visit my locker
SVX Mods: ND iridium spark plugs, Impreza RS fpr, afr tuned to 13.2:1 using a custom MAF bypass, custom exhaust, WRX 5MT w/ STi RA 1st-4th gear & stock WRX 5th gear, Exedy 13 lb flywheel & Sport Clutch, STi Group N tranny & engine mounts, urethane spacers in rear subframe, rear diff mounts, and pitch stopper, SVX Sport Strut Springs (185f/150r), custom 19 mm rear swaybar, urethane swaybar mounts, Rota Torque 17x8", 225/45-17 Proxes 4 tires, Axxis Deluxe Plus organic brake pads.
|