Sorry Trevor, here is a simple break down.
1) I had a remote start installed.
2) All my dash lights would come on and the car stalls.
3) I got code #23, I cleaned the sensor and I cleared the memory.
4) All seemed fine, no more stalling.
5) Car starts normal with the key but has a hard time with the remote.
6) I noticed the battery voltage would go up and down.
7) I had the alternator checked and had it replaced.
8) All seemed fine, voltage was back to normal.
9) All my dash lights come on again. Sometimes the car stalls, sometimes it doesn't.
10) This time No codes come up.
11) I had the car checked twice and the alternator was fine but the battery was low even after a full charge.
|