Ok, found the problem. It was the stupid resistor. I kind of fixed that my way, works for now. But I decided to also change the filter and put some fresh fluid in there. Now, the manual states that for trans fluid and filter change you should need about 3 quarts of fluid. So I put the 3 quarts in, check the fluid level, looks like nothing is there. So put the car in drive, and it won't move. I put another 2 quarts in, the car drives awsome, shifts good, but when I check the fluid level, it's still a little low. So, I put a little more then 5 quarts total in, and it still needs a little more. Is there a mistake in the manual? How much do you guys usually put in there when changing the fluid and filter? Thanks.