The plastic piece is for shipping to hold the bearing together.
Once you pull that out the bearing separates into a "master" outer race housing and two inner race's and two bearing packs. As stated earlier, clean off the shipping grease and use some high temp grease.
One other thing to add in the step-by-step is the brake anti lock sensor removal.
__________________
David
96LSi 102k Laguna Blue
95 LS-L AWD, Safety package, 140k Polo Green
the Chick Magnet:
91 Justy GL EFI 4x4 154k (new motor @120k)
90 Yamaha V-Max
82 Yamaha XJ650LJ Turbo
My Diver Propulsion vehicle:
88 Jeep Cherokee 160k
"U-sta-have"
88 XT6 AWD Pearl,
86 XT Lt Blue,
85 XT AWD/4x4 Turbo Space Blue
|