|
Re: Where is vin 001?
YT would be able to tell you the whole story on this
For quite a while, om a cold start I would get a momentary rattle from the engine on startup, which immesiately went away. For a while we assumed ir was a lifter which wasn't holding pressure. Not a big deal as the sound immesiately went away and all was fine.
It wasn't until we took the engine apart to do the head gaskets that we found symptoms of a strange oiling problem. He tore it down further and thats when he found that the bearings were mostly worn away.
I am not sure of the particulars, but YT could tell you exactly what he thinks. Had the head gasket never come up, the bearings may have lasted about 25,000-30,000 more miles before failing completely.
Seems like less oiling = more friction =more heat generated and less power due to friction. Have to give it more gas to overcome this, which starts things in a vicious cycle.
From the way my new engine performs, I think I was only getting about 80% of the power available in the old engine.
.
__________________
.
Subaru Ambassador
1996 Polo Green LSi #216 ..138,100 miles. ..SOLD
JFICX8659TH100216.....Date of Manufacture: November 16, 1995.....
Fuji Heavy Industries..Ōta North Plant....Ōta City,. Gunma Prefecture, Japan
In-Service Date: January 2, 1997
"The Pristine Green Polo Machine”
First Polo Green on the Network
First Clear front turn signals, JDM Alcyone hood emblem, rear panel, and BOXER engine cover on the Network (US) (2000)
First 5000K HID factory fog lights (2007)
First SVX JDM BBS wheels on a USDM SVX (2013)
HID lighting (5000K) for headlight and H3 fog lights, PIAA SuperExtreme 120W high beams, rebuilt EG33 longblock, Cometic head gaskets, Phase II flexplate, AMR aluminum radiator with custom silicone hoses, 160A high-output alternator in aluminum-ceramic coated case, new design alternator wiring upgrade v.4, rare factory headlight protectors, refinished JDM BBS mesh aluminum wheels and custom, polished billet aluminum new hex center caps, LED grille mod, R1 Concepts high-carbon cryo slotted rotors, Akebono ceramic pads, Goodridge S/S braided brake lines, Smallcar Stage 1 shift kit, ThermalTech aluminum/ceramic-coated valve covers, Energy Suspension urethane front & rear swaybar bushings, Bontrager22 rear swaybar with QS Components Chromoly Teflon/Kevlar endlinks, "$15.00/5 minute" suspension mod. Hella Supertone horns, Custom stainless steel exhaust system with 2" headpipes, Magnaflow cats, AeroTurbine AR25 resonator /AWD "Bullet" muffler.
R.I.P. 2010 Subaru Outback Limited 2.5 CVT...338,000 miles. Totaled by a 1,300 lb. COW March 4, 2016 
2014 Hyundai Avante Limited ...178,000 miles. Actually quieter and smoother than the Outback 
2007 Mazda Miata MX-5 PRHT...102,000 miles.
Plenty of parts, service and windshields. 
4th Registered Network member —2/21/2001
My NEW locker..I...My Email..I..Wikipedia/SVX .
.
|