My MAF is in the stock location, I even run the stock airbox. No ill effects.... idles just fine.
I have a Forge by pass valve. Also, the engine breather system is stock. The PCV valve is plumbed to the pressure box and the cam cover breathers to the compressor intake. Check the photos in my first post in this thread.
Works really well at least at 5PSI. The engine vacuum is sufficient for the brake booster and all other stuff work too.
I haven't tried the cruise at speeds where the engine runs at boost conditions all the time, tho
.
Good luck, Alliance !
Tapani
Quote:
Originally Posted by icingdeath88
Tapani (since I know you'll check this eventually), where is your MAF at and do you have a blow-off valve? I forget.
|