|
Hey, putting this into words will make it sound easy. It is easy IF you got one small enough. The first thing I would do is to pull the grill out and see if your cooler is going to fit. You might have to remove the radiator brackets that bolt to the core support on either side of the hood latch. Then remove the two bolts that support the air conditioner condenser. This is so that you can push the radiator and condenser back so that you have room.
If it fits, the next thing to do is to plumb your lines so that the line comming out of the original cooler is now directed to your auxilary cooler. Then from the aux cooler, back to the tranny. Fasten the cooler to the condenser, check for leaks. You won't have to add much fluid. Let me know if you have any questions.
|